Infra-View® Infrared Boiler/Furnace Thermometer Principles of Operation

The Infra-View® sensor detects the heated CO2 gas created in a boiler or furnace as a by product of the combustion process when fossil fuels such as, all grade coals, natural gas, oil, lignite, peat and refuse are burned. The infrared spectral response of the Infra-View sensor is preset specifically to detect the CO2 gas spectrum. It can measure the average or peak temperature of the gas directly within the 30:1 field of view as it is heated within the specified 250°F to 3,000°F temperature range (Note: higher end temperatures available). Since the boiler is a dynamic environment, the Infra-View® is designed to continuously measure the CO2 at a sampling rate of 100 msec. in the rising stream of heated flue gas at that may exceed 25 ft./ sec.

Infra-View® Infrared Thermometers are in-situ remote sensing infrared detectors that are permanently flange mounted on any port, door or penetration into the boiler or furnace. The Infra-View patented design is supplied with a rugged protective cooling jacket that is factory assembled and pre-piped with an air cooler, purging and filtering system designed to work in most severe service environments. Customer supplied compressed air and two wire shielded signal cable is all that is necessary for operation when integrated in a 24 VDC and 4-20 mA signal loop supplied from a DCS, digital or analog recording device.

INFRA-VIEW® BOILER THERMOMETER

Infra-View® Remote Boiler Thermometer
Infra-View® Remote Boiler Thermometer
Infra-View® Installation Example
Infra-View® Installation Example

 

Use our Pyrometer Selector to find the right solution for your temperature monitoring needs and place a request for quote.

Click Here for Pyrometer Selector
Instructions and Documentation

Infra-View® Infrared Boiler Thermometer Instructions

Click one of the links below to see user instructions related to the Infra-View® Infrared Boiler/Furnace Thermometer:

Infrared Boiler Thermometer

Need an Infrared Boiler/Furnace Thermometer?

Check out our Infra-View® Infrared Boiler/Furnace Thermometer! Comes with a durable and functional cooling jacket for easy mounting and installation. Read temperatures up to 4,500 deg F with low maintenance due to passive detection method from outside the boiler wall.

  • Medium: Combustion/Flue Gases
  • Temperature Range: Up to 4,500 deg F
  • Low Maintenance, Up to 25 year lifespan

Read More

Portable Infrared Boiler Thermometer

Need a Portable Infrared Boiler/Furnace Thermometer?

Check out our Infra-View® Handheld Boiler/Furnace Thermometer! A basic sensor with carrying case, tripod, mounting bracket, and local readout.

  • Medium: Combustion/Flue Gases
  • Pressure: Up to 4,500 deg F
  • Easy to Install

Read More

Infrared Buss Duct Thermometer

Need an Infrared Generator Buss Duct Thermometer?

Check out our Infra-View® Generator Buss Duct Thermometer! Comes with a simple mounting ring for easy install, place one on each phase to protect buss work from overheating.

  • Medium: Ductwork Material
  • Temperature Range: 0 to 1,000 deg F
  • Great for System Evaluation

Read More

© Copyright 2024 Infra-View® | JNT Technical Services, Inc. All rights reserved.